Hydrogen fluorideRegistername 5: https://recherche.chemikalieninfo.de/public/stoff/21217?dv=18&sv= is an inorganic compound with chemical formula . It is a colorless gas or liquid that dissolves in water to yield hydrofluoric acid and fumes strongly in air (hydrofluoric acid fumes rising being lighter than air). It is the principal industrial source of fluorine, often in the form of hydrofluoric acid, and is an important feedstock in the preparation of many important compounds including pharmaceuticals and polymers such as polytetrafluoroethylene (PTFE). HF is also widely used in the petrochemical industry as a component of superacids. Due to strong and extensive hydrogen bonding, it boils near room temperature, a much higher temperature than other hydrogen halides.
Hydrogen fluoride is an extremely dangerous gas. It readily forms the highly corrosive hydrofluoric acid upon contact with moisture. The gas can also cause blindness by rapid destruction of the corneas.
History In 1771 Carl Wilhelm Scheele prepared the aqueous solution, hydrofluoric acid, in large quantities, although hydrofluoric acid had been known in the glass industry before then. French chemist Edmond Frémy (1814–1894) is credited with discovering hydrogen fluoride while trying to isolate fluorine.
Structure and reactions
HF is diatomic in the gas phase, consisting of separate molecules. As a liquid, HF forms relatively strong hydrogen bonds, hence its relatively high boiling point. Solid HF consists of zigzag chains of HF molecules. The HF molecules, with a short covalent H–F bond of 95 pm length, are linked to neighboring molecules by intermolecular H–F distances of 155 pm. Liquid HF also consists of chains of HF molecules, but the chains are shorter, consisting on average of only five or six molecules.
Comparison with other hydrogen halides Hydrogen fluoride does not boil until in contrast to the heavier hydrogen halides, which boil between . This hydrogen bonding between HF molecules gives rise to high viscosity in the liquid phase and lower than expected pressure in the gas phase.
Aqueous solutions
HF is miscible with water (dissolves in any proportion). In contrast, the other hydrogen halides exhibit limiting solubilities in water. Hydrogen fluoride forms a monohydrate with melting point , which is above the melting point of pure HF.
HF and H2O similarities Boiling points of the hydrogen halides (blue) and hydrogen chalcogenides (red): HF and H2O break trends.Freezing point of HF/ H2O mixtures: arrows indicate compounds in the solid state.
Aqueous solutions of HF are called hydrofluoric acid. When dilute, hydrofluoric acid behaves like a weak acid, unlike the other hydrohalic acids, due to the formation of hydrogen-bonded ion pairs [·F−]. However concentrated solutions are strong acids, because bifluoride anions are predominant, instead of ion pairs. In liquid anhydrous HF, self-ionization occurs:
which forms an extremely acidic liquid ().
Reactions with Lewis acids Like water, HF can act as a weak base, reacting with Lewis acids to give superacids. A Hammett acidity function (H0) of −21 is obtained with antimony pentafluoride (SbF5), forming fluoroantimonic acid..
Synthesis Hydrogen fluoride is typically produced by the reaction between sulfuric acid and pure grades of the mineral fluorite (calcium fluoride):
About 20% of manufactured HF is a byproduct of fertilizer production, which generates hexafluorosilicic acid. This acid can be degraded to release HF thermally and by hydrolysis:
High purity results from the reduction of in a atmosphere at 120 °C. Crystallized DF from this reaction, analyzed by neutron diffraction has been used to gain a better understanding of the hydrogen bonding in solid HF.
Use In general, anhydrous hydrogen fluoride is more common industrially than its aqueous solution, hydrofluoric acid. Its main uses, on a tonnage basis, are as a precursor to organofluorine compounds and a precursor to synthetic cryolite for the electrolysis of aluminium.
Precursor to organofluorine compounds HF reacts with chlorocarbons to give fluorocarbons. An important application of this reaction is the production of tetrafluoroethylene (TFE), precursor to Teflon. Chloroform is fluorinated by HF to produce chlorodifluoromethane (R-22):
Pyrolysis of chlorodifluoromethane at 550–750 °C yields TFE.
HF is a reactive solvent in the electrochemical fluorination of organic compounds. In this approach, HF is oxidized in the presence of a hydrocarbon and the fluorine replaces C–H bonds with C–F bonds. Perfluorinated carboxylic acids and sulfonic acids are produced in this way.
1,1-Difluoroethane is produced by adding HF to acetylene using mercury as a catalyst.
The intermediate in this process is vinyl fluoride or fluoroethylene, the monomeric precursor to polyvinyl fluoride.
Precursor to metal fluorides and fluorine The electrowinning of aluminium relies on the electrolysis of aluminium fluoride in molten cryolite. Several kilograms of HF are consumed per ton of aluminium produced. Other metal fluorides are produced using HF, including uranium tetrafluoride.
HF is the precursor to elemental fluorine, F2, by electrolysis of a solution of HF and potassium bifluoride. The potassium bifluoride is needed because anhydrous HF does not conduct electricity. Several thousand tons of F2 are produced annually..
Catalyst HF serves as a catalyst in alkylation processes in refineries. It is used in the majority of the installed linear alkyl benzene production facilities in the world. The process involves dehydrogenation of n-paraffins to olefins, and subsequent reaction with benzene using HF as catalyst. For example, in oil refineries "alkylate", a component of high-octane petrol (gasoline), is generated in alkylation units, which combine C3 and C4 olefins and isobutane.
Solvent Hydrogen fluoride is an excellent solvent. Reflecting the ability of HF to participate in hydrogen bonding, even proteins and carbohydrates dissolve in HF and can be recovered from it. In contrast, most non-fluoride inorganic chemicals react with HF rather than dissolving.
Lasers High power HF lasers have been constructed but their operating wavelength is strongly absorbed by water in the atmosphere. Systems like the short-lived Tactical High Energy Laser instead rely on deuterium fluoride lasers. Such lasers can produce 4.5W average power with 4000 pulses per second. These lasers rely on combustion reactions of or with dissociated fluorine gas , producing excited vibrational and rotational states of HF: + → * + The vibrationally excited state of HF laze around and DF around .
Health effects
Hydrogen fluoride is highly corrosive toward tissue. It can cause blindness by rapid destruction of the corneas.
References
External links
Fluorides, Hydrogen Fluoride, and Fluorine at ATSDR. Retrieved September 30, 2019 CDC – NIOSH Pocket Guide to Chemical Hazards Hydrogen Fluoride Fact Sheet at Toxics Use Reduction Institute